Fluko Industrial Disperser Machine MS
High shear rotor-stator disperser primarily designed for tank mounting
The Fluko Disperser Machine MS
A high shear rotor-stator disperser primarily designed for tank mounting where energy-intensive mixing in batch operation is required. The Fluke batch dispersing machines are configured in compact form without bearings in the dispersing head, as a result of which the mixing assembly is not susceptible to wear and the product remains uncontaminated. The stirrer shaft is directly mounted on the drive shaft of the electric motor, which ensures minimal weight and compact configuration. The stator is mounted on a cage that will be attached directly to the motor or the mounting flange. The stirrer shaft, the mixing head and the stator cage are all produced in stainless steel, other weldable materials are available on request.
Stirrer Design
Drives
Machine mounting, shaft seals
Mixing head
Materials
Accessories
-
The Fluko MS is used in a wide range of industries for fine dispersion of low to medium viscosity products in batches of up to 1 - 2 tons.
Machine mounting, shaft seals
For non-pressurised tanks, the dispersing machine can be mounted using the stator cage flange or a mounting flange. For pressurised or vacuum processes, special seal flanges and seal housings are available tailored to the specific applications. The machine configurations are highly adaptable for a wide range of operating conditions. Rotary lip seals or mechanical seals are chosen to best suit the individual customer needs. The MS dispersing machine is available in the top, side or bottom-mounted variants.Mixing head
The rotor-stator mixing assembly is supported solely on the mounting flange. This means that in the top-mounted configuration, there are no seals or bearings in contact with the product. This is especially advantageous with sensitive or abrasive products as the risk of product contamination can be minimised.