Supply, service, calibrate (UKAS) and support a wide range of industrial mixing and laboratory equipment.

Binder KMF Series Climate Chambers with Humidity

Constant climate chamber for stress testing from -10 °C to 100 °C

The BINDER KMF ensures absolutely constant test conditions throughout the testing area. A big advantage of this constant climate chamber is its low space requirement and flexibility in terms of water supply. The wide temperature and humidity range make this constant climate chamber ideally suited for stress testing.

Binder KMF Series Climate Chambers with Humidity.

Electronically controlled APT.line™ preheating chamber and refrigerating system assuring temperature accuracy and long term stable reproducible results.

BINDER KMF Series models are available with internal capacities ranging from 115 – 720 Litres.

Features:

  • Temperature range -10 °C to 100 °C (without humidity)
  • Temperature range 10 °C to 90 °C (with humidity)
  • Humidity range 10 % to 90 % RH
  • MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
    • User friendly LCD screen
    • Easy-to-read menu guide
    • Integrated electronic chart recorder
    • Variety of options for the graphic display of process parameters
    • Real time clock
  • Electronically controlled humidification and dehumidification system with capacitive humidity sensor
  • Heated door
  • Inner glass door with sealing
  • Independent adjustable temperature safety device class 3.1, providing full protection against chamber over-temperature, with visual and audible temperature alarm
  • Access port with silicone plug Ø 30 mm, left side
  • Safety connection kit for water supply and drainage, including water hose, total length 6 m
  • Ethernet interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software
  • BINDER Communication software APT-COM™ 3 Basic Edition
  • Stainless steel rack
  • BINDER test confirmation

BINDER KMF Series: Options available include:

BINDER KMF Series Climate Chambers (E5.2)
Access ports with silicone plug 30, 50, 100 mm O
Securing elements for additional fastening of racks (1 set of 4) O
Additional PT 100 temperature sensor, flexibly installed, with external connection, including LEMO connector (3-pin) O
RS 422 interface O
External fresh water supply set consists of fresh and waste water canister, cabling and pump O
BINDER PURE AQUA SERVICE O
Disposable cartridge for BINDER PURE AQUA SERVICE O
Keyboard lock O
Temperature precision measurement according to DIN 12880 and 9-point humidity measurement / factory standard with measurement log and certificate, measured at 25 °C (77 °F) / 60 % RH or at specified values O
Calibration certificate for temperature and humidity. Measurement in the center at 25 °C (77 °F) / 60 % RH or at specified values O
Extension to factory calibration certificate for temperature and humidity. Each additional measurement at an additional measuring point or set of values O
Data Logger Kit TH 100/70: With two attachable combined sensors. One for the continuous temperature and humidity recording of -40 °C to 100 °C / 0 % to 100 % RH. Second one at the data logger for recording the environmental conditions of -40 °C to 70 °C / 0 % to 100 % RH. Kit includes 1 data logger, 2 attachable combined humidity/temperature sensors with 2 m extension cable and 1 fixture for the connection at the BINDER unit O
Data Logger Kit TH 100: For the continuous temperature and humidity recording of -40 °C to 100 °C / 0 % to 100 % RH. Kit includes 1 data logger, 1 attachable combined humidity/temperature sensor with 2 m extension cable and 1 fixture for the connection at the BINDER unit O
Data Logger Kit T 220: For the continuous temperature recording of -90 °C to 220 °C. Kit includes 1 data logger, PT 100 sensor with 2 m Teflon extension cable and 1 fixture for the connection at the BINDER unit O
Data Logger Software: Configuration und evaluation software for all BINDER Data Logger Kits, incl. data cable (RS 232) O
Data Logger converter cable (RS 232 to USB 2.0) O
Rack, stainless steel O
Shelf, perforated, stainless steel O
Interior lighting (15 W) O
Locking door handle with key O
Temperature safety device, class 3.3 (DIN 12880) with visual alarm O
4-20 mA analog output for temperature and humidity measurements (e.g. chart recorder connection), with 6-pin DIN socket. Outputs are adjusted automatically as the controller is adjusted O

Reviews


There are no reviews yet.

Be the first to review “Binder KMF Series Climate Chambers with Humidity”

one × 1 =

Your Name (required)

Your Email (required)

Telephone Number

Name of product you're interested in

Your Message

Please enter the code: captcha