Admix Dynashear Inline Wet Mill / Emulsifier
Inline Hygienic High Shear Mixer
DynaShear� - Sanitary Inline High Shear Mixer
Designed as a high speed, high shear mixer and emulsifier for continuous processing, the DynaShear� sets the standard for what in-line mechanical mixers should provide. It is constructed completely of 316SS (internals, housing, shafting and base), its unique dual stage axial and radial heads provide greater throughput and flow, and the shear rates generated insure droplet and particle size reduction down to 3-5 microns with excellent distribution. Some processors are using DynaShear� for a single pass continuous mix after powder addition upstream, while others have found maximum results after recirculating back through a batch reactor for a 3 to 5 minute total blend time.
- High Efficiency, High Shear Continuous Mixing
- Unique Combination of Axial and Radial Stators
- Low Maintenance-No Bushings, Shims or Wear Sleeves
- Complies with the latest 3-A TPV Standards #36-01
- Fully Machined 316SS Housing
- Stainless Steel Motor
- Average Droplets of 3-5 Microns�with 98% Distribution Under 5 Microns
- CIP-able and designed for rapid disassembly for cleaning or inspection
If your application requires higher intensity, more milling and greater particle size reduction, our versatile Boston Shearmill will generate droplet and particle size reduction down to 1 micron while withstanding uneven flow patterns, bumps, jolts and fluctuations in pressure. 
Sizing and Engineering Data
| Model DS-215 | Model DS-425 | Model DS-575 | |
| Axial Diameter | 1.25 in. / 31.75 mm | 2.25 in. / 57 mm | 3.66 in. / 93 mm |
| Axial Tip Speed | FPM/FPS: 2258/37 MPM/MPS: 688/10.6 |
FPM/FPS: 2121/35 MPM/MPS: 646/10.6 |
FPM/FPS: 3450/58 MPM/MPS: 2051/17.6 |
| Radial Diameter | 2.13 in. / 54 mm | 4.25 in. / 108 mm | 5.75 in. / 146 mm |
| Radial Tip Speed | FPM/FPS: 3832/64 MPM/MPS: 1167/19 |
FPM/FPS: 4006/67 MPM/MPS: 1221/20.4 |
FPM/FPS: 5419/90 MPM/MPS: 1651/27 |
| Motor Size | 2 HP / 1.5 kW | 5 HP / 4 kW | 20 HP / 15 kW |
| Motor Speed | 6900 RPM | 3600 RPM | 3600 RPM |
| Maximum Flow Rate | 22 gpm / 83 lpm | 65 gpm / 246 lpm | 175 gpm / 662 lpm |
| Inlet Size | 1.5 in. / 38.1 mm | 2.5 in. / 64 mm | 4.0 in. / 102 mm |
| Outlet Size | 1.0 in. / 25.4 mm | 2.0 in. / 51 mm | 3.0 in. / 76 mm |
-
More Dynashear Benefits
- Stainless steel motor and fully machined 316SS housing
- High efficiency, high shear continuous mixing
- Unique combination of axial and radial stators
- Low maintenance – No bushings, shims or wear sleeves
- Average droplets of 3-5 microns with 98% distribution under 5 microns
- CIP-able and designed for rapid cleaning and inspection
- Complies with 3-A standard #36-01
- EHEDG Type EL Class 1 Certified
