X

Fluko IBC Container Stirrer SMEC

Only %1 left

Liquid products are increasingly fed to production processes directly from the transport container

IBC-Container stirrer SMEC

Container stirrers are used for all common systems of plastic and metal transport containers when you need to mix directly in the container. The FLUKO SMEC 55.6 container stirrer is designed for low viscosity media and consist of a 3 phase motor directly coupled to a stirrer shaft. 1 or 2 propellers are mounted on the shaft and can be adjusted in height. The container mounting traverse is made of stainless steel and can be attached without tools, the adjustable fixing elements on the traverse allow the stirrer to be mounted on many different types of vessels.

The SMEC series is the economical solution for homogenisation of products in 1000 litre IBC transport containers. This model can stir viscosity liquids up to the measurement of 600mPas at a speed of 1000rpm and it has a weight of 24kg. It also has a stirrer type of 2 x d140mm propeller.

Typ
Art.-Nr. 
Power, Voltrage 
Speed  
Viscosity  Stirrer type  Weight 
incl. traverse
SMEC 55.6
Art.58305561
0,55 kW 400 V, 50 Hz
1000 rpm
up to 600 mPas 2 x d140 mm
Propeller
24 kg
SMEC55.6 ATEX
Art.58305562
0,55 kW 400 V, 50 Hz
1000 rpm II 2G c T3
up to 600 mPas 2 x d140 mm
Propeller
25 kg
SMEC75.4
Art. 58307541
0,75 kW 400 V, 50 Hz
1500 rpm
up to 600 mPas 1 x d140 mm
Propeller
21 kg
SMEC75.4 1Ph
Art. 58307544
0,75 kW, 230 VAC, 50 Hz
1500 rpm
up to 600 mPas 1 x d130 mm
Propeller
35 kg
SMEC75.4 ATEX
Art. 58307543
0,75 kW, 400 V, 50 Hz
150 rpm
up to 600 mPas 1 x d140 mm
Propeller
26 kg
SMEC75.4-FU
Art. 58307545
0,75 kW 400 V 50 Hz
150 up to 1500 rpm
up to 600 mPas 1 x d140 mm
Propeller
28 kg
SMEC150.4
Art. 58315041
1,5 kW, 400 V, 50 Hz
1500 rpm
up to 1200 mPas 2 x d140 mm
Propeller
43 kg
SMEC150.4 1 Ph
Art. 58315044
1,5 kW, 230 VAC, 50 Hz
1500 rpm
up to 1200 mPas 2 x d130 mm
Propeller
28 kg
SMEC150.4 ATEX
Art. 58315042
1,35 kW, 400 V, 50 Hz
1500 rpm II 2G c T3
up to 1200 mPas 2 x d140 mm
Propeller
35 kg
SMEC150.4 FU
Art. 58315004
1,5 kW, 400 V, 50 Hz
1500 rpm
up to 1200 mPas 2 x d140 mm
Propeller
45 kg
PMLEC4
Art. 58304002
1 kW, 6 bar compressed air
300 up to 1500 rpm
up to 1000 mPas 2 x d140 mm
Propeller
20 kg
Motor overload switch, (non-Ex) with low-voltage cut out, CEE plug and 5 m cable                
Motor overload switch, 1-phase motors, with low-voltage cut out, plug and 5 m cable  
Motor overload switch (Ex) with low-voltage cut out, CEE plug and 5 m cable  
Fork-lift sleeves  
Crane lash

Specifications

FLUKO SMEC container stirrers are designed for low viscosity media and consist of a 3 phase motor directly coupled to a stirrer shaft. 1 or 2 propellers are mounted on the shaft and can be adjusted in height. The stirrer shaft and the propellers are made of highly corrosion-resistant AISI316Ti stainless steel. The container mounting traverse is made of AISI304 stainless steel and can be fixed to the container frame without tools. The adjustable fixing elements of the traverse allow the stirrer to be mounted on many types of the open vessel with diameter under 1 m. 3 phase motors are supplied in IE2 efficiency standard as of 0.75 kW power.
 

Special solutions

The FLUKO PMLEC Container stirrer is configured and the SMEC above, however with a 1 kW pneumatic drive For use in hazardous areas, the SMEC and the PMLEC are available in an ATEX approved version for use in Zones 1 and 2. The SMEC FU version is a container stirrer with an integrated frequency inverter, for speed variation between 150 and 1500 rpm.
 

Options

FLUKO SMEC container stirrers can be delivered with Halar® E-CTFE or PVDF coated stirrer shafts and propellers for use with highly corrosive products. To make the handling of the stirrers easier, optional crane lashes or fork-lift sleeves can be ordered for the stirrer traverse. We strongly recommend the optional motor overload protection switch to prevent motor damage and to provide a safe switching possibility. The switch is equipped with a low-voltage shut off to prevent unexpected starting after plugging in the stirrer. The motor switch is also equipped with 5 m cable, a CEE plug and is mounted on the traverse.
More from Fluko