At John Godrich we have over 30 years' experience with supplying, servicing and calibrating ovens. Most ovens in our very large range have a calibration certificate as standard, and we can supply an oven with up to 720 litres' capacity that will serve virtually any temperature need, no matter how special it is.

We are a UKAS Calibration Laboratory for temperature as well as service - on site.

TC 40, TC 100

Our Thermocenter 40 and 100 litre range of ovens features a unique construction - all the fans, controls and read-outs are mounted in the door of the oven. A Thermocenter oven generally uses less space and less energy, compared like-for-like against other ovens. See below for the new larger capacity Thermocenters. We can offer the following types of oven: Laboratory; Vacuum; Furnaces; Incubators; Cooled Incubators; CO2 Incubators; Solvent/Safety Drying; Specials. Most of our ovens have stainless steel interiors, and we can offer a full calibration and back-up service, either on your premises or in our own workshops. We'd be pleased to supply you with our recommendation for any oven application. Spend a few moments completing this email form, send it to us and we'll respond as soon as we can with our suggestions.

Top of page

TC 160, TC 240, TC400

Top of page

VC20, VC50

Vacucenter
Vacuum Oven
Option with new digital readout and controls for vacuum
Temperature up to 200 Deg C
20 Litre and 50 Litre sizes
Other options available

Top of page

Incucenter

40 to 400 Litres Capacity
Temperature up to 100 Deg c (Higher Temp for Sterilisation)
Controlled Fan speed 0 -100%
Rounded internal corners for easy cleaning
Inner Glass door

Top of page

All The Above Salvis units have:-

• The new microprocessor controller / programmer - 50 programmes with 15 steps each - real time clock - temperature ramp / timer

NEW: Biocenter CO2 Incubator

Low Cost with accurate control.
Model Sizes: 170 Litre

Salvis Lab Biocenter is the ideal CO2 incubator for all cell and tissue cultures. The innovative and reliable design concept ensures optimal conditions for your applications. The selected temperature control technology operates with out and ventiliation inside the chamber, thus reducing the risk of contamination to a minimum. Constant conditions for temperature, CO2 and humidity are kept independent of the load.

Programmable Safety

Programming the biocenter could not be simpler. The automatic alarm system may be adapted to the individual needs of the user. The sophisticated software monitors all functions of the Biocenter.

Top of page

- Laboratory Glassware
- Washing Machines
- Water Baths
- Freeze Dryers

Top of page

Renggli Laboratory
Glassware washing machines
Glassware drying cabinets

Top of page

Binder Vacuum Drying Ovens

Binder APT Line of Temperature Chambers

Binder MKT Series -40° to +180°C

CLICK HERE FOR FULL DETAILS OF MKT SERIES

Binder APT Line Environmental Test Chambers

KBF SERIES Climatic Chambers for Constant Atmosphere

The KBF series now has even more advanced technology and incorporates intelligent details for improved performance and simplified handling.

The KBF series climatic chambers for constant conditions offer cutting-edge technology and a number of features for more comfortable working conditions. An innovative high-pressure humidification system now operates with either tap water or demineralized water.

There are three Climatic Chambers in the KBF range, KBF 115 (E2), KBF 240 (E5.1), and KBF 720 (E2) see below for further details

KBF 115 (E2) Constant Climate Chamber

KBF 115 (E2) Constant Climate Chamber

• Electronically controlled APT.line™ preheating chamber and refrigerating system assuring temperature accuracy and reproducible results
  
• Temperature range -10 °C (14 °F) up to 100 °C (212 °F) - without humitiy
  
• Humidity range 10 % RH to 90 % RH
  
• MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
  
• Features:
  
• - User friendly LCD screen
  
• - Easy-to-read menu guide
  
• - Integrated electronic chart recorder
  
• - Real time clock
  
• Electronically controlled controlled humidification and dehumidification system with capacitive humidity sensor
  
• Suitable for stability tests according to ICH guideline Q1A
  
• Inner glass door
  
• Environmental friendly refrigerant R 134a
  
• Independent adjustable temperature safety device class 3.1 (DIN 12880), with visual and audible temperature alarm
  
• Access port with silicone plug Ø 30 mm (1.18 inch), left side
  
• Complete safety connection kit for water supply and drainage, including water hose, total length 6 m (19.7 ft.)
  
• RS 422 interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software
  
• 2 stainless steel racks included
  
• BINDER test certificate

FOR FULL DETAILS OF KBF 115 CLICK HERE

KBF 240 (E5.1) Constant Climate Chamber

KBF 240 (E5.1) Constant Climate Chamber

• Electronically controlled APT.line™ preheating chamber and refrigerating system assuring temperature accuracy and reproducible results
  
• Temperature range 0 °C (32 °F) up to 70 °C (158 °F) - without humitiy
  
• Humidity range 10 % RH to 80 % RH
  
• MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
  
• Features:
  
• - User friendly LCD screen
  
• - Easy-to-read menu guide
  
• - Integrated electronic chart recorder
  
• - Variety of options for the graphic display of process parameters
  
• - Real time clock
  
• Electronically controlled humidification and dehumidification system with capacitive humidity sensor
  
• Suitable for stability tests according to ICH guideline Q1A
  
• Inner glass door with sealing
  
• Environmental friendly refrigerant R 134a
  
• Independent adjustable temperature safety device class 3.1 (DIN 12880), with visual and audible temperature alarm
  
• Access port with silicone plug Ø 30 mm (1.18 inch), left side
  
• Complete safety connection kit for water supply and drainage, including water hose, total length 6 m (19.7 ft.)
  
• Ethernet interface for GLP/GMP and the FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software
  
• 2 stainless steel racks included
  
• BINDER test certificate

FOR FULL DETAILS OF KBF 240 CLICK HERE

KBF 720 (E2) Constant Climate Chamber

KBF 720 (E2) Constant Climate Chamber

• Electronically controlled APT.line™ preheating chamber and refrigerating system assuring temperature accuracy and reproducible results
  
• Temperature range -10 °C (14 °F) up to 100 °C (212 °F) - without humitiy
  
• Humidity range 10 % RH to 90 % RH
  
• MCS controller with 25 storable programs of 100 sections each for a maximum of 500 program segments
  
• Features:
  
• - User friendly LCD screen
  
• - Easy-to-read menu guide
  
• - Integrated electronic chart recorder
  
• - Variety of options for the graphic display of process parameters
  
• - Real time clock
  
• Electronically controlled controlled humidification and dehumidification system with capacitive humidity sensor12880) with optical and acoustic alarm
  
• Suitable for stability tests according to ICH guideline Q1A
  
• Inner glass door
  
• Environmental friendly refrigerant R 134a
  
• Independent adjustable temperature safety device class 3.1 (DIN 12880), with visual and audible temperature alarm
  
• Access port with silicone plug Ø 30 mm (1.18 inch), left side
  
• Complete safety connection kit for water supply and drainage, including water hose, total length 6 m (19.7 ft.)
  
• RS 422 interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software
  
• 2 stainless steel racks included
  
• BINDER test certificate

FOR FULL DETAILS OF KBF 720 CLICK HERE

Top of page

Velp Refrigerated incubators
90 and 220 Litre
+3 to +50 Deg C
Simple control
RS232 Port

Top of page

Thermobil standard blcok heater

Liebisch Metal Block Heaters - Standard range or special temperatures from minus 10 Deg C to with Friotherm to plus 500 Deg C.
Flexible range from 5ml to large capacity tubes.
Blocks with 6 up to 264 samples
Evaporator systems
Custom made blocks a speciality.

Top of page

Labtherm

LABTHERM - Liebisch Metal Block Heaters
This is the basic appliance from the Liebisch Product Series. The thermostat has a fixed heating block. The bores can be supplied as standard designs with diameters from 5 to 41 mm with a capacity for 6 to 264 samples.
Different versions can be supplied using different designs, controls and sample receivers. You can specify your requirements and combine the different processes available.

Top of page

Epptherm

EPPTHERM - Liebisch Metal Block Heaters
This is the thermostat with an integrated heating block and bores specifically designed for heating of 0,2/0, 5/1, 5/2,0 ml reaction vessels. The working temperature range has been adapted for plastic vessels (room temperature up to 95°C). Here, there are also different standard sample holder designs available.

Top of page

Minitherm

MINITHERM - Liebisch Metal Block Heaters
The smaller version of the standard units Labtherm, Thermobil and Evaporator is the Minitherm. Functions and features correspond to the larger units. The display of the PID controller shows the actual value of the temperature. The setpoint can be displayed by pressing a button.

Top of page

Evaporator

EVAPORATOR - Liebisch Metal Block Heaters
The Evaporator consists of a metal block thermostat which is combined with the patented Multiplex-Valve-Unit for heating and concentrating different samples with selected gases. The height-adjustable valve unit features interchangeable Luer needles made of stainless steel with plug-type connections. For easy sample loading, the Mulitplex-Valve-Unit can be swivelled to the side.

Top of page

Multivario

MULTIVARIO - Liebisch Metal Block Heaters
The Multivario is the universal appliance in the Liebisch Product Range. Up to 20 different methods - among them nitrohydrochloric acid disintegration, cyanide, Soxhlet extraction and mercury disintegration - can be used with one single appliance. The system consists of an externally controlled heating block for 14 reaction vessels (NS29), the air diffuser, a working rack with cooling water system and a carrying rack for the reaction vessels.

Top of page

Friotherm

FRIOTHERM - Liebisch Metal Block Heaters
With this unit you can cool down your test samples below ambient temperature. With help of Peltier technology this special covered heating block can be heated to max. 120°C.

Top of page

Rotatherm

ROTATHERM - Liebisch Metal Block Heaters
With this unit you can cool down your test samples below ambient temperature. With help of Peltier technology this special covered heating block can be heated to max. 120°C.

Top of page