John Godrich - Industrial & Laboratory EquipmentContactHome

UKAS Calibration

At John Godrich we have over 60 years' experience with supplying, servicing and supporting mixers. Whether you need a mixer for use in a laboratory, in a pilot project or as part of a major manufacturing process, we can supply the most efficient solution.

We can offer the following types of mixer: High Speed Dissolvers; IBC Stirrers; Pneumatic Stirrers; Multiple Shaft Mixers; Agitators; Laboratory Dissolvers; Stirrers; In-line Dispersers; Dispersers; Planetary mixers; Emulsifiers; Homogenizers; Turbines; Rotor and Stator; Jet mixers. These mixers mix paint, inks, chemicals, solvents, adhesives, pastes, putties, silicones, sealants, thickeners, coatings, cosmetics, creams, pharmaceuticals, slurry and wastewater. And we can offer you the most appropriate type of motor - standard, ATEX, or pneumatic - as well as the vessels you need plus the equipment to fill & clean the pans/vessels. We'd be pleased to supply you with our recommendation for any mixer application. Spend a few moments completing this email form, send it to us and we'll respond as soon as we can with our suggestions.

Filling lines and complete plant including mixers and pan cleaning equipment can now be supplied - Please refer by email



New from John Godrich

CEB Impianti Machine EW100-DS

CEB Impianti

CEB Impianti EW100-DS Washing system with solvent by two heads, for open top vessels and palletized tanks

The cycle is performed by using solvent, the pumping group placed in the back part of the system takes the solvent from the stocking containers and drive it to the washing heads. The washing heads can be selected by using a key selector on the front panel.

This type of system can be used to clean totally open containers (generally used for production) and stainless steel or plastic palletized tanks (generally used for stoking and trasportation).

The system controls the various washing cycles. Thanks to the two washing heads, preparation times are limited to the minimum necessary which result in a very high production level.

Visit CEB Impianti website




Zanelli Turnkey Plant
Zanelli High Speed Disperser Production Machine
Zanelli

Zanelli Production mixers / dispersers

Main application fields of our equipment

Low viscosity products: Wall paint, enamel, varnish, primers, fillers
Medium viscosity products: Ink, epoxy base liquids, PVC, wall plastic paint, anti graffiti paint, pastes, abrasives, grease
High viscosity products: Mastics, sealant materials, adhesives, padding, putty, dental pastes

    • Heavy duty Turbodispersers
    • Multiple Shaft mixers mounted in Mezzanine
    • Planetary Mixing
    • Horizontal mixers
    • Aeromechanical Powder Feed
    • Extruders
      Zanelli Turnkey Plant
      Zanelli Production Plant for water based coating products
    • Automatic Packaging/Filling/Palletizing
    • CAD/CAM Systems
    • Production Process Control
    • ATEX Conforming
    • Turnkey Plant

For details of Zanelli Equipment visit Zanelli's web site

Top of page



See Dispermill website

NEW
ATP DispermillDispermill logo
Orangeline

Orangeline: up to 1 litres capacity
See details

Multifunction laboratory mixers
available in five models:
up to 1 litre - Orangeline
up to 8 litres - Yellowline
up to 12 litres - Ivoryline
up to 20 litres - Redline
up to 50 litres - Blueline
High shear
Low noise
Adjustable speed up to 9000 rpm
Adjustable timer
PID electronics ensuring constant speed
CE Safety Protection
Emergency mains switch
Smooth Action - Lifting device
Different heads are available:-
  • Dispersion disc
  • Milling Disc
  • Rotor Stator
  • Head

Mixing vessels
1 litre to 50 litres
Double-wall vessel for milling
up to 5 litres
Vacuum Vessel System
From 2 Litres Available
ATEX Available

Production Models
up to 100 litres - ATP-Dissolver airlift
up to 200 litres - ATP Dissolver airlift
Larger production sizes now made

Ivory Line
Pilot-Dissolver up to 60 litre

Production-Dissolver up to 200 litre
M-300

For more details about the products please see Dispermill website.

Top of page


Dispermill 1

Basket Mill
Dispermill
NEW
ATP DispermillDispermill logo

Basket Mill
Up to 2 litre and 2-8 litres
Milling Attachment

For the first time there is a universal machine for all your laboratory and pilot plant needs. With the Dispermill you can mix, disperse, homogenize, emulsify and mill. Dispermill is the solution for optimal particle size reduction and distribution.

  • No waste during milling
  • Direct product control
  • Easy cleaning
  • High efficiency due to optimal product flow (no dead areas)
  • Many available acccessories
  • Patented system Dispermill is a highly efficient design for mixing, dispersing and milling of dry materials into fluids.
    This machine is applicable for batch sizes from 500 ml up to 8000 ml.
    The achieved results can be scaled-up for production machinery.
    With the Dispermill you can make 99% of all laboratory simple batches.
    Many applications in the paint and ink industry, but also (photo)chemicals, cosmetics, food and pharmaceutical industry.

Top of page



Inmix X Type Rotor / Stator

INMIX Large Range of Time and Energy Saving Mixers available
Our Rotostat system typically saves 1/3 of the energy when it is used in place of other mixers, yet a Rotostat can achieve the same volume of mix as other devices, in as little as 1/6 of the time! Our new unique Rotosolver, on the other hand, can achieve pre and final mix at the same time, thus reducing mixing time and eliminating secondary procedures.

MIXING CHARACTERISTICS
PROPELLORS
DRIVE UNITS

  • Rotostat - Rotor stator mixer - mounted on single shaft . No Basket, quick throughput without heat build up.
  • Rotofoil low energy agitator - hydrodynamic design
  • Rotojet Axial FlowJet Mixer - no aeration
  • Rotosolver high Shear Mixer: no moving parts
  • Flame Proof ATEX Available

Top of page




FlukoFluko stirrer

FlukoFLUKO Stirrers
Flexible and universal in application

FLUKO stirrers provide an optimised combination of drive, materials and construction for every application. A comprehensive range of stirrer models, drive types and agitators ensures the perfect configuration for the task at hand. From laboratories to production, with electric or pneumatic drives, FLUKO has the right stirrer. Our co-operation with leading drive manufacturers and the use of high quality materials for the product-contacting machine parts result in robust stirrers with long working lives. FLUKO stand stirrers already conform to the future European "Safe Stirrer" standards.Thanks to the modular design, stirrers can be integrated into complete stirrer or dissolver installations.


FlukoFLUKO Container Stirrer SMEC
for one-way containers

FLUKO SMEC Container stirrers are the economical solution for the homogenisation of liquids in one-way containers. The SMEC stirrer has proven its worth in many industry branches in the pre-processing of liquids in containers or in preventing sedimentation or liquid separation during transport or storage. The simple handling and robust construction of the SMEC stirrers ensure a long and reliable service life


FlukoFLUKO Container Stirrer GMC
for transport containers

FLUKO GMC Container stirrers are the economical solution for the homogenisation of liquids in transport containers. The GMC stirrer has proven its worth in many industry branches in the pre-processing of liquids in containers or in preventing sedimentation or liquid separation during transport or storage. The simple handling and robust construction of the GMC stirrers ensure a long and reliable service life.


fluko dispersing machine
FlukoFLUKO In-line Dispersing Machines
For labs, industry research and production

They require product feed, but produce their own feed pressure of up to 1 bar per chamber.
The dispersion processing is assured as every particle that passes through the machine is caught in the chamber and processed.



Fluko
Fluko batch dispersing machine
FLUKO Batch Dispersing Machines
Operate with a free floating shaft

This means that there are no mountings and no seals on the shaft in the product. Thanks to this special construction, the mixing head stays free of wear and the product free of contamination. The product is sucked into the rotor from above and below, and is expelled radially. The dispersing machines are available in sizes suitable for laboratories up to production machines.







Visit Fluko website

Top of page




PC Laborsystem LPV1-5
PC Laborsystem

The specialists for customised laboratory mixing and dosing systems

  • Disperser
  • Multi-shaft Disperser
  • Planetary Disperser
  • One-shaft Mixer
  • Multi-Shaft Mixer
  • Planetary Mixer
  • Combi Mixing Systems
  • Dosage Systems
  • ATEX available

We have a range of machines with various motor sizes and tools, with a net capacity of 300ml to approx 30 litres, to choose from. All mixing systems can be adapted to your needs, e.g. with or without vacuum, heating or cooling mantle, high temperature resistant, automatic filling, with data collecting devices and processor-controlled. Latter include control of RPM, torque and temperature during the mixing process.

Visit the PC Laborsystem website

Top of page




Arec.X Stirrers

STIRRING LINE

AREC.X
Velp Magnetic Stirrer with ceramic heating plate.

The newest product of the Stirring Line developed by VELP Scientifica within the sphere of heating magnetic stirrers.
This new VELP stirrer is equipped by a connection for a contact Vertex thermostat for the direct control of temperature of the stirred liquid.
AREC has a white ceramic heating plate that is highly resistant to corrosion and excellent for observing changes of colour (e.g. titrations etc.) and is extremely easy to clean. The built-in electronic system keeps the stirring speed constant, even when the viscosity of the liquid changes (counter-reaction).
An advanced, reliable and safe solution offerd by VELP Scientifica for meeting diversified needs.

Vertex digital thermoregulatorVelp Scientific

Vertex digital thermoregulator with 'Fuzzy Logic' technology

The VTF digital thermoregulator is provided with Fuzzy Logic technology, which allows us to use the instrument in many applications where precise thermoregulation is required.
Possibility to select the operation time with relative syopping of the thermoregulation.
It comes with the VELP system so that handling and positioning of the probe inside the liquid is easy.
The instrument can be used combined with the most common heating magnetic stirrers having the predisposition to the contact thermometers.

Top of page







Velp Scientific

Velp Bench Stirrers
Variable speed up to 20 litres
(Low Viscosity)
Heated magnetic stirrers
Velp - Bench Stirrers


Top of page



Vortex Classic

NEW VORTEX MIXERS

VORTEX CLASSIC - The Vortex mixer evolution.
VORTEX 'CLASSIC' is the ultimate expression of continuous product evolution.
'CLASSIC' is a solution suited to the most diversified mixing needs. It is able to produce the highest performance ratings in terms of speed while at the same time ensuring reliability and safety.

It is equipped with two operation modes, with the possibility to change vibration frequency:

TOUCH - the automatic 'Touch' mode starts the shaking with a light amount of pressure applied by the test tube on the cupping glass.
CONTINUOUS - continuous operation mode that, when combined with the use of a wide range of accessories (optional), make the instrument suited to a large variety of needs.

CLASSIC also has a special lever.
(Touch - Platform) that, when properly positioned, ensures maximum stability of the instrument depending on the operation mode selected.
Its advanced performance places the instrument at the highest standards on the market.

VORTEX CLASSIC comes standard with a cup for single test tube.

VORTEX WIZARD - The next Vortex mixer generation.
Winner of the IBO Design Vortex ClassicBronze Award

VORTEX 'WIZARD' represents a radical technology innovation in vortes mixers evolutionary process. Based on optic technology. WIZARD is provided with an innovative operational mode, absolutely unique on the market. In fact, the infrared system (R) detects the presence of the test tube and automatically the vibration is activated.

VORTEX 'WIZARD' is featured by a low profile and ergonomic design which, combined with the used materials, assures a high stability and better comfort.

Provided with a double operational working mode, offers the possibility to change the frequency of the vibration:

SENSOR - an infrared system (R) detects the presence of the test tube and automatically the vibration is activated! No pressure neede by the lab operator!

CONTINUOUS - continuous operation mode combined with a large number of accessories

VORTEX WIZARD comes standard with a cup for single test tube.

Top of page



exakt 80s
Exakt 80S
exakt

For nearly 50 years EXAKT Triple Roller mills have been used in a wide variety of applications to simultaneously achieve dispersion, homogenity and high particle fineness of products ranging from thick fluids to highly viscous pastes. The fields of application range from the preperation of ointments in pharmacies and hospitals to food processing, cosmetics, pharmaceutical products, chemical products, paint products and screen printing in electronic, ceramic and glass industries.

  • To meet the different demands of these applications, the Ekakt range of triple roll mills 50,80 and 120 can be equipped with various features to meet the customer's specific needs.
  • The roller material (hard porcelain, aluminium oxide (Al2O3), hard chrome plated steel).
  • The scraper system (plastic, surface-treated steel, aluminium oxide, zirconium oxide)
  • Cooling & heating of the rollers.
Basic Models

EXAKT 50, 80, 120

S Models

EXAKT 80S, 120S

Requirements
In product fineness
Standard
High end
Possible product fineness µm

Batch operation in µm

Batch special application µm

-20

-

-

4 - 9

4

1

Available roller diameter in mm
50, 80, 120
80, 120
Product capacity ltr / hr
7 - 45
10 - 60

For other models visit Exakt website


Top of page


We'd be pleased to supply you with our recommendation for any mixer application. Spend a few moments completing this email form, send it to us and we'll respond as soon as we can with our suggestions.

...helping you select the most cost-effective mixer

Your Details
Title:
Name:
Company:
Address 1:
Address 2:
County/State:
Post/Zip Code:
Country:
Telephone:
Fax:
Email:
Your mixing requirements:
Volume:
Viscosity:
S G:
Type of product:
Type of mixing:
Size of vessel:
Diameter -
Height -
Other details:
Other comments:

Home | About Us | Mixers | Ovens | Balances & Weighing | Coating Test Equipment |Food Line | Road Marking
Textile | Environmental | Lab & Medical |
Wastewater Treatment | Other Lines | Service Calibration | Contact Us

Website by TSP. Copyright © John Godrich. All rights reserved. Page updated 17/03/2010

Kern Balances