Liebisch Salt Spray & CCT Cabinets

Sauter Gauges - Force, Thickness, Hardness, Stroboscopes

1000 litre Salt Spray Cabinet

2000 litre Salt Spray Cabinet

Salt spray cabinets
Liebisch
400 and 1000 litre capacities, chest type
Cabinet encloses all storage chambers for salt and humidity

Front Opening Salt Spay & CCT Cabinets
400, 1000, & 2000 litre capacities

CCT combined corrosion test cabinets.
Combination of salt, dry heat (60deg C), humidity (up to 50deg C) fresh air Also available in front-opening 400 to 1000 and 2000 litre capacities
Test to national and international standards

Standards:
Tests products to ASTM B117 +
BS EN ISO and automobile manufacturers requirements

Liebisch sulphur dioxide cabinet (Kesternich)
Tests products to DIN 50017 + DIN 50018
BS 3900 F8
ISO 6988

SAUTER FA 10

Push / Pull Mechanical Force Gauge with Peak-Hold function
Delivered in a hard carrying case
Real time or Peak Hold Switch to observe transients or capture peaks by a drag indicator

Zeroing by a short push of the switch
Tare Ring for an easy calibration of the tester
Dual Scale: Shows NEWTON and kg

Can be mounted on all manual test stands or the optional handle

Dimensions: L 230 x B 60 x H 50 mm; Weight: 560 g

Technical Highlights:
External Sensor
Accuracy: Standard: 3 % of the measured value
Offset-Accur: 1 % of the measured value
Test Objects Non-magnet coatings on steel and other metals
Min. radius workpiece: Convex: 1,5 mm Concave: 25 mm
Resolution 0,1 µm Max 1 000 µm
Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration (base plate and calibration foils). This results in a superior accuracy of approx. 1 % of the measured value.

Auto-Power-Off function

External sensor for better access to the test object (Cable length: 1 m)
Power supply 4 x 1.5V AA Battery
Base plate and calibration foils included
Weight: 250 g
Delivered in a hard carrying case

SAUTER HDA 100-1 DIGITAL SHORE HARDNESS METER

Technical Highlights:
Model HDA 100-1
Hardness Type Shore A
Max 100 HA
Resolution 0.1 HA
Shore Hardness A, C, D
Accuracy: 1 % of the measured value
Mini Statistic Function
Typical applications, to measure the penetration of
Shore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material.
Shore C/0: foam, sponge, etc.
Shore D: plastics, formica, epoxies, plexiglass, etc.
Data Output to PC
RS 232C Output included
Option: Software and cable to PC ATC-01
Measurement mode:
Max mode: Holds the maximum value in the display
Point mode: Shows one instant value
Average mode: Calculates the average value out of 9 single measurements
Power Management
Auto-Power-Off function
Low-Battery indicator
Delivered in a hard carrying case

Technical Highlights:
Model SB 12K0.1
Max FPM 12 000
Resolution FPM 0,1
Up to 40 000 Flashes per minute (FPM) xenon
Accuracy: 0.05 % of the applied value
Sampling time: 0.3 sec

Quick-Set Function H/L to avoid the time-consuming adjustment.
Auto-Stop function: Turns the instrument off after 5 min to conserve the strobe light.
Application: When the speed or the rotation of a moving object matches the - ash rate of the stroboscope, the moving object appears still.
The instrument can give the user the illusion of “stopped motion”, when the observed object is actually in a moving state.
Resolution of SB models: 0.1 FPM < 1000 PFM; 1 FPM > 1000 FPM
Power supply direct by 230 V, Adaptor incl.
External trigger to operate the instrument externally by a signal 3 to 24 V
Fast check x 2 /2 for quick range control
By adjusting the flashing rate until the observed object is perfectly standing, the operator can
* measure the speed or the rotations frequency of the object contact free
* study a process in action

Specifically built water baths up to 2000 litre capacity for testing plastic pipes and other components.

High and low temperatures
Controlled humidity
Many sizes and combinations

For more information MKF -40˚C to +180˚C - with controlled humidity.
For more information MKT -70˚C to +180˚C

MKF is available in 115, 240 and 720 litres capacity.
MKT: 240 litres capacity.
Complete with programming as standard.

Physical Laboratory Testing Equipment

See NEW Zehntner brochure

Page 4: Glossmeters
ZGM 1110
ZGM 1120

Page 5: Glossmeters
ZGM 1020/1022/1023
ZOL 1190 - On-Line-Gloss-Measuring-System

Page 6:
ZGH 1024 - GlossHaze
ZRM 1021 - Reflectometer 45/0
H 100 - Helmen Chalking Tester

Page 7:
ZAA 2300 - Automatic Film Applicator Coater
ZUA 200 - Universal Applicator
ZAF 2010 - 4-sided Applicator Frame

Page 8:
ZFR 2040 - 4-sided Applicator
ZSA 2110 - Wire-bar Applicator
ZWA 2121 - Wasag Applicator

Page 9:
ZLA 2130 - Sagging Applicator
ZTC 2200 - Test Charts
ZPH 2035 - Specimen Holder

Page 10:
ZPV 2030 - Precision-vacuumplates
ZGR 2020 - 2024 Grindometers
ZTK 2060 - 2062 Drying Gauges

GoldCheck
Jewellery and Precious Metal Analyser

Precise karat determination of precious metals at low cost.

Compact eco
X-ray fluorescence analyser

A compact, low cost X-ray coating thickness and material analyser designed for the inspection of jewellery, electronic components and other small parts.

See also Compact Eco/Pin

Compact 5/PIN
X-ray fluorescence analyser

The Compact 5/PIN offers a universal material and coating thickness analyser at a reasonable price/performance ratio. The use of a high resolution Silicon Semiconductor detector makes the Compact 5/PIN an ideal tool for users who want best limits of detection and highest precision together with maximum flexibility.

Compared with a conventional prop.-counter the Semiconductor detector offers about 4 times better energy resolution. This gives much better separation of overlapping elements. The much higher peak/background ratio of the detector allows the analysis of very thin coatings, about 10 times thinner as so far possible. A very comprehensive library of software tools allows the analysis of bulk as well as liquid samples (plating bath). Multiple layer coatings on complex base materials can be analysed as well. This makes the Compact 5/PIN the ideal tool for the electronic industry.

See also Compact 5

maXXi 5/PIN
X-ray fluorescence analyser

The maXXi 5/PIN offers a universal material and coating thickness analyser at a reasonable price/performance ratio. The use of a high resolution Silicon semiconductor makes the maXXi 5/PIN an ideal tool for users who want to have best limits of detection and the highest precision. The better detector resolution together with a higher signal-to-noise ratio allows the analysis of thinner, complex coatings, like for instance on solar panels.

A variety of sample stages allows the adaptation of the maXXi 5/PIN to customers' needs and budgets. A very comprehensive library of software tools allows the anlaysis of bulk as well as liquid samples (from Z = 20/Ca). Multiple layer alloy coatings on complex base materials can be analysed as well. This makes the maXXi 5/PIN the ideal universal tool for quality control, incoming inspection and the laboratory.

See also MaXXi 5

ecoMaster

The ecoMaster offers a universal coating thickness measurement and materials analysis at an extremely reasonable price/performance ratio. Designed for customers, where in addition to high precision ease of use and versatility are major factors, the ecoMaster is the ideal measuring system. The precise nondestructive measurement, even of multilayer samples, is performed in a few seconds. The thickness and composition of alloy coatings can be analysed simultaneously. Additionally, the ecoMaster performs the analysis of plating solutions. The compact sample chamber allows testing of all kinds of differently dimensioned parts especially for electronics, fastener and jewellery.

For more details click here

The size of the analyzed spot on the sample is minimized by the use of X-ray optics, possible spotsizes range from 20 µm to 300 µm.

A X-ray capillary lens collects a large amount of tube radiation and focuses the X-rays to the analysis area, thus providing a higher precision of analysis in spite of the use of a low power X-ray tube.

The advantages of Eagle III µ-Probe are obvious:

• Due to a high peak to background ratio limits of detection are 10 - 50 ppm
• Non destructive analysis even of irregular shaped samples by means of the small size of the excited area.
• Large sample chamber for voluminous samples
• Analysis in air or gas atmosphere (He) is possible, so organic or liquid samples can be analyzed for elements down to phosphorus
• Flexible adjustment of the size of the excited area with „VariSpot” or by easy changing of the capillary optics.
  
  

The QuaNix 4200 and Quanix4500 have been designed to meet the requirements of automotive and other painting applications.

The QuaNix 4500 automatically changes over with substrate recognition over all metals from ferrous to non-ferrous or reverse. For those who measure only over steel or iron we have designed the QuaNix 4200.

Product Features:

• Excellent accuracy
• One button only
• Proven Hall Sensor Technology (and eddy-current for QuaNix 4500)
• One hand operation for all applications
• Integrated sensors without cable and connectors
• Automatic switch on/off
• Display in microns or mils
• Acoustic signal confirms measurement

For more information about Quanix products, including the new 8500 series